Lexmark Staple and 2/4 Hole Punch Finisher

Lexmark part number 26Z0080

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.

The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking.

Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity).

Supports Bin 2 has a full sensor.

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilised. Hole punching and offset stacking are supported to Bin 2 only.

The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

General Specs

• Part no. 26Z0080
• Size (HxWxD) 1065 x 641 x 658 mm
• Weight 43.2 kg
• Packaged size (HxWxD) 806 x 792 x 1095 mm
• Packaged weight 56 kg

Paper Handling

• Media types supported: Plain Paper
• Paper weight range supported: 60 - 256 g/m²
• Finishing functions: Offset stacking, Stapling, Hole punching

Compatible with:

• Lexmark MX910dxe
• Lexmark MS911de
  
• Lexmark MX910de
  
• Lexmark MX911de
  
• Lexmark MX912de
• Lexmark CX922de
• Lexmark CX921de
• Lexmark CX923dxe
• Lexmark CX923dte
• Lexmark CX924dxe
• Lexmark CX924dte
• Lexmark CS921de
• Lexmark CS923de
• Lexmark CX920de