When a new toner is installed in a Brother MFC1810 and MFC1910W printer, a reset gear should turn and trigger a switch to reset the toner counter.
Sometimes the toner counter doesn’t get reset and realigning the reset gear is a little bit too techy for most users.
The following should reset the toner message for these printers:
- Press the MENU button.
- Hit the down arrow until you see info on the display.
- Press the OK button.
- Hit the down arrow until you see reset drum.
- Press and hold the OK button until you see reset on the display.
- Press *, 1, 1.
- You should now see accepted on the display.
- Turn off the printer.
- Turn on the printer.
The toner message should now be reset.
Please leave a comment if you find this guide useful or there is anything I can add to it to make it easier to follow.